GTI NB-IoT Module Test Specification
Table of Contents
1 Scope 1
2 References 1
3 Definitions, symbols and abbreviations 1
4 Test Environment 2
4.1 Default Test Environment 2
4.1.1 Test Frequencies 2
4.1.2 USIM Parameters 2
4.2 Test System Architecture 3
4.2.1 Common Test System Architecture 3
4.3 UE Configuration 3
5 Connectivity 3
5.1 Basic Communication Procedure 3
5.1.1 Test Purpose 3
5.1.2 Reference Specification 4
5.1.3 Test Applicability 4
5.1.4 Test Conditions 4
5.1.5 Test Procedure 4
5.1.6 Expected Result 8
5.2 RRC Connection Release Based on NAS Signaling (RAI) 8
5.2.1 Test Purpose 8
5.2.2 Reference Specification 9
5.2.3 Test Applicability 9
5.2.4 Test Conditions 9
5.2.5 Test Procedure 9
5.2.6 Expected Result 10
5.3 RRC Connection Release Based on BSR Signaling (RAI) 10
5.3.1 Test Purpose 10
5.3.2 Reference Specification 10
5.3.3 Test Applicability 10
5.3.4 Test Conditions 11
5.3.5 Test Procedure 11
5.3.6 Expected Result 12
5.4 PSM Configuration/ UL Transmission 12
5.4.1 Test Purpose 12
5.4.2 Reference Specification 12
5.4.3 Test Applicability 12
5.4.4 Test Conditions 12
5.4.5 Test Procedure 13
5.4.6 Expected Result 14
5.5 eDRX Configuration/DL Trasmission 14
5.5.1 Test Purpose 14
5.5.2 Reference Specification 14
5.5.3 Test Applicability 14
5.5.4 Test Conditions 14
5.5.5 Test Procedure 15
5.5.6 Expected Result 16
6 Throughput and RF performance 16
6.1 UL Service in Enhanced Coverage/Throughput/TX RF performance 16
6.1.1 Test Purpose 16
6.1.2 Reference Specification 16
6.1.3 Test Applicability 16
6.1.4 Test Conditions 16
6.1.5 Test Procedure 17
6.1.6 Expected Result 18
6.2 DL Service in Enhanced Coverage/Throughput/RX RF performance 19
6.2.1 Test Purpose 19
6.2.2 Reference Specification 19
6.2.3 Test Applicability 19
6.2.4 Test Conditions 19
6.2.5 Test Procedure 20
6.2.6 Expected Result 21
6.3 NRSRP/NRSRQ/SINR measurement under no interference environment 21
6.3.1 Test Purpose 21
6.3.2 Reference Specification 22
6.3.3 Test Applicability 22
6.3.4 Test Conditions 22
6.3.5 Test Procedure 22
6.3.6 Expected Result 23
6.4 NRSRP/NRSRQ/SINR measurement under AWGN environment 23
6.4.1 Test Purpose 23
6.4.2 Reference Specification 24
6.4.3 Test Applicability 24
6.4.4 Test Conditions 24
6.4.5 Test Procedure 24
6.4.6 Expected Result 25
6.5 NRSRP/NRSRQ/SINR measurement under neighbor cell interference environment 26
6.5.1 Test Purpose 26
6.5.2 Reference Specification 26
6.5.3 Test Applicability 26
6.5.4 Test Conditions 26
6.5.5 Test Procedure 27
6.5.6 Expected Result 28
6.6 Uplink Throughput Testing Supporting Rate Enhancement 28
6.6.1 Uplink Throughput Testing Supporting Rate Enhancement /15K ST 28
6.6.2 Uplink Throughput Testing Supporting Rate Enhancement /15K MT 31
6.6.3 Uplink Throughput Testing Supporting Rate Enhancement /3.75K 32
6.7 Downlink Throughput Testing Supporting Rate Enhancement 33
6.7.1 Test Purpose 33
6.7.2 Reference Specification 33
6.7.3 Test Applicability 33
6.7.4 Test Conditions 33
6.7.5 Test Procedure 34
6.7.6 Expected Result 35
7 Power Consumption 35
7.1 Power Consumption in Idle State/PSM 35
7.1.1 Power Consumption in Idle State/PSM/ Good Coverage 35
7.1.2 Power Consumption in Idle State/PSM/ Normal Coverage 38
7.1.3 Power Consumption in Idle State/PSM/ Weak Coverage 39
7.2 Power Consumption in Idle State with eDRX 40
7.2.1 Power Consumption in Idle State with eDRX/ Good Cover 40
7.2.2 Power Consumption in Idle State with eDRX/ Normal Coverage 43
7.2.3 Power Consumption in Idle State with eDRX/ Weak Coverage 44
7.3 UL UDP Service Power Consumption Test 45
7.3.1 UL UDP Service/ Power Consumption/15K ST 45
7.3.2 UL UDP Service/ Power Consumption//15K MT 48
7.3.3 UL UDP Service/ Power Consumption//3.75K 49
7.3.4 UL UDP Service/ Power Consumption/15K ST/ Rate Enhancement 50
7.3.5 UL UDP Service/ Power Consumption/15K MT/ Rate Enhancement 51
7.3.6 UL UDP Service/ Power Consumption/3.75K/ Rate Enhancement 53
7.4 DL UDP Service / Power Consumption 54
7.4.1 DL UDP Service / Power Consumption 54
7.4.2 DL UDP Service/ Power Consumption Test/Rate Enhancement 56
7.5 Bidirectional Service with eDRX / Power Consumption 57
7.5.1 Test Purpose 57
7.5.2 Reference Specification 57
7.5.3 Test Applicability 58
7.5.4 Test Conditions 58
7.5.5 Test Procedure 58
7.5.6 Expected Result 59
7.6 Uplink Data Transmission in MAC Layer / Power Consumption 60
7.6.1 Uplink Data Transmission in MAC Layer/ Power Consumption/15K ST 60
7.6.2 Uplink Data Transmission in MAC Layer/ Power Consumption/15K MT 63
7.6.3 Uplink Data Transmission in MAC Layer/ Power Consumption/3.75K 64
7.6.4 Uplink Data Transmission in MAC Layer/15K ST/Rate enhancement 65
7.6.5 Uplink Data Transmission in MAC Layer/15K MT/Rate enhancement 66
7.6.6 Uplink Data Transmission in MAC Layer/3.75K/Rate enhancement 67
7.7 Downlink Data Transmission in MAC Layer / Power Consumption 68
7.7.1 Downlink Data Transmission in MAC Layer / Power Consumption 68
7.7.2 Downlink Data Transmission in MAC Layer / Power Consumption / Rate Enhancement 71
7.8 Power Consumption of Registration 72
7.8.1 Test Purpose 72
7.8.2 Reference Specification 72
7.8.3 Test Applicability 72
7.8.4 Test Conditions 72
7.8.5 Test Procedure 73
7.8.6 Expected Result 73
8 Positioning 74
8.1 Positioning Service/GPS 74
8.1.1 Test Purpose 74
8.1.2 Reference Specification 74
8.1.3 Test Applicability 74
8.1.4 Test Conditions 74
8.1.5 Test Procedure 75
8.1.6 Expected Result 75
8.2 Positioning Service/BDS 75
8.2.1 Test Purpose 75
8.2.2 Reference Specification 75
8.2.3 Test Applicability 76
8.2.4 Test Conditions 76
8.2.5 Test Procedure 76
8.2.6 Expected Result 77
8.3 Positioning Service / GPS / Power Consumption 77
8.3.1 Test Purpose 77
8.3.2 Reference Specification 77
8.3.3 Test Applicability 77
8.3.4 Test Conditions 77
8.3.5 Test Procedure 78
8.3.6 Expected Result 78
8.4 Positioning Service / BDS / Power Consumption 79
8.4.1 Test Purpose 79
8.4.2 Reference Specification 79
8.4.3 Test Applicability 79
8.4.4 Test Conditions 79
8.4.5 Test Procedure 80
8.4.6 Expected Result 80
Annex A Communication Suite 81
A.1 Test Architecture for Communication Suite 81
A.2 Communication Suite 81
A.2.1 Test Purpose 81
A.2.2 Reference Specification 81
A.2.3 Test Applicability 82
A.2.4 Test Conditions 82
A.2.5 Test Procedure 82
A.2.6 Expected Result 83
Annex B Propagation Conditions 83
