1 Scope

2 References

3 Definitions, symbols and abbreviations

4 Test Environment

4.1 Default Test Environment
4.1.1 Test Frequencies
4.1.2 USIM Parameters
4.2 Test System Architecture
4.2.1 Common Test System Architecture
4.3 UE Configuration

5 Connectivity

5.1 Basic Communication Procedure
5.1.1 Test Purpose
5.1.2 Reference Specification
5.1.3 Test Applicability;
5.1.4 Test Conditions
5.1.5 Test Procedure
5.1.6 Expected Result
5.2 RRC Connection Release Based on NAS Signaling (RAI)
5.2.1 Test Purpose
5.2.2 Reference Specification
5.2.3 Test Applicability;
5.2.4 Test Conditions
5.2.5 Test Procedure
5.2.6 Expected Result
5.3 RRC Connection Release Based on BSR Signaling (RAI)
5.3.1 Test Purpose
5.3.2 Reference Specification
5.3.3 Test Applicability
5.3.4 Test Conditions
5.3.5 Test Procedure
5.3.6 Expected Result
5.4 PSM Configuration/ UL Transmission
5.4.1 Test Purpose
5.4.2 Reference Specification
5.4.3 Test Applicability
5.4.4 Test Conditions
5.4.5 Test Procedure
5.4.6 Expected Result
5.5 eDRX Configuration/DL Trasmission
5.5.1 Test Purpose
5.5.2 Reference Specification
5.5.3 Test Applicability
5.5.4 Test Conditions
5.5.5 Test Procedure
5.5.6 Expected Result

6 Throughput and RF performance

6.1 UL Service in Enhanced Coverage/Throughput/TX RF performance
6.1.1 Test Purpose
6.1.2 Reference Specification
6.1.3 Test Applicability;
6.1.4 Test Conditions
6.1.5 Test Procedure
6.1.6 Expected Result
6.2 DL Service in Enhanced Coverage/Throughput/RX RF performance
6.2.1 Test Purpose
6.2.2 Reference Specification
6.2.3 Test Applicability
6.2.4 Test Conditions
6.2.5 Test Procedure
6.2.6 Expected Result
6.3 NRSRP/NRSRQ/SINR measurement under no interference environment
6.3.1 Test Purpose
6.3.2 Reference Specification
6.3.3 Test Applicability
6.3.4 Test Conditions
6.3.5 Test Procedure
6.3.6 Expected Result
6.4 NRSRP/NRSRQ/SINR measurement under AWGN environment
6.4.1 Test Purpose
6.4.2 Reference Specification
6.4.3 Test Applicability
6.4.4 Test Conditions
6.4.5 Test Procedure
6.4.6 Expected Result
6.5 NRSRP/NRSRQ/SINR measurement under neighbor cell interference environment
6.5.1 Test Purpose
6.5.2 Reference Specification
6.5.3 Test Applicability
6.5.4 Test Conditions
6.5.5 Test Procedure
6.5.6 Expected Result
6.6 Uplink Throughput Testing Supporting Rate Enhancement
6.6.1 Uplink Throughput Testing Supporting Rate Enhancement /15K ST
6.6.2 Uplink Throughput Testing Supporting Rate Enhancement /15K MT
6.6.3 Uplink Throughput Testing Supporting Rate Enhancement /3.75K
6.7 Downlink Throughput Testing Supporting Rate Enhancement
6.7.1 Test Purpose
6.7.2 Reference Specification
6.7.3 Test Applicability
6.7.4 Test Conditions
6.7.5 Test Procedure
6.7.6 Expected Result

7 Power Consumption

7.1 Power Consumption in Idle State/PSM
7.1.1 Power Consumption in Idle State/PSM/ Good Coverage
7.1.2 Power Consumption in Idle State/PSM/ Normal Coverage
7.1.3 Power Consumption in Idle State/PSM/ Weak Coverage
7.2 Power Consumption in Idle State with eDRX
7.2.1 Power Consumption in Idle State with eDRX/ Good Cover
7.2.2 Power Consumption in Idle State with eDRX/ Normal Coverage
7.2.3 Power Consumption in Idle State with eDRX/ Weak Coverage
7.3 UL UDP Service Power Consumption Test
7.3.1 UL UDP Service/ Power Consumption/15K ST
7.3.2 UL UDP Service/ Power Consumption//15K MT
7.3.3 UL UDP Service/ Power Consumption//3.75K
7.3.4 UL UDP Service/ Power Consumption/15K ST/ Rate Enhancement
7.3.5 UL UDP Service/ Power Consumption/15K MT/ Rate Enhancement
7.3.6 UL UDP Service/ Power Consumption/3.75K/ Rate Enhancement
7.4 DL UDP Service / Power Consumption
7.4.1 DL UDP Service / Power Consumption
7.4.2 DL UDP Service/ Power Consumption Test/Rate Enhancement
7.5 Bidirectional Service with eDRX / Power Consumption
7.5.1 Test Purpose
7.5.2 Reference Specification
7.5.3 Test Applicability
7.5.4 Test Conditions
7.5.5 Test Procedure
7.5.6 Expected Result
7.6 Uplink Data Transmission in MAC Layer / Power Consumption
7.6.1 Uplink Data Transmission in MAC Layer/ Power Consumption/15K ST
7.6.2 Uplink Data Transmission in MAC Layer/ Power Consumption/15K MT
7.6.3 Uplink Data Transmission in MAC Layer/ Power Consumption/3.75K
7.6.4 Uplink Data Transmission in MAC Layer/15K ST/Rate enhancement
7.6.5 Uplink Data Transmission in MAC Layer/15K MT/Rate enhancement
7.6.6 Uplink Data Transmission in MAC Layer/3.75K/Rate enhancement
7.7 Downlink Data Transmission in MAC Layer / Power Consumption
7.7.1 Downlink Data Transmission in MAC Layer / Power Consumption
7.7.2 Downlink Data Transmission in MAC Layer / Power Consumption / Rate Enhancement
7.8 Power Consumption of Registration
7.8.1 Test Purpose
7.8.2 Reference Specification
7.8.3 Test Applicability;
7.8.4 Test Conditions
7.8.5 Test Procedure
7.8.6 Expected Result

8 Positioning

8.1 Positioning Service/GPS
8.1.1 Test Purpose
8.1.2 Reference Specification
8.1.3 Test Applicability;
8.1.4 Test Conditions
8.1.5 Test Procedure
8.1.6 Expected Result
8.2 Positioning Service/BDS
8.2.1 Test Purpose
8.2.2 Reference Specification
8.2.3 Test Applicability;
8.2.4 Test Conditions
8.2.5 Test Procedure
8.2.6 Expected Result
8.3 Positioning Service / GPS / Power Consumption
8.3.1 Test Purpose
8.3.2 Reference Specification
8.3.3 Test Applicability;
8.3.4 Test Conditions
8.3.5 Test Procedure
8.3.6 Expected Result
8.4 Positioning Service / BDS / Power Consumption
8.4.1 Test Purpose
8.4.2 Reference Specification
8.4.3 Test Applicability;
8.4.4 Test Conditions
8.4.5 Test Procedure
8.4.6 Expected Result

Annex A Communication Suite

A.1 Test Architecture for Communication Suite
A.2 Communication Suite
A.2.1 Test Purpose
A.2.2 Reference Specification
A.2.3 Test Applicability
A.2.4 Test Conditions
A.2.5 Test Procedure
A.2.6 Expected Result

Annex B Propagation Conditions
 

GTI NB-IoT Module Test Specification_v2.0.0